Download our spacer installation booklet here

• Installation by a trained professional is highly recommended.
• Please verify this is the correct application for your vehicle before ordering, we only guarantee you receive what is described above.
• The vehicle will require modifications to the wheel studs to make this type of adapter work properly.
•     - Be aware that the studs on the vehicle cannot stick out past the face of the back adapter plate, you will need to modify them by grinding/cutting/trimming.
•     - The end of the vehicle's studs cannot come into contact with the back side of the outer adapter piece when installed.
•     - The two adapter pieces must fit completely flush with each other.
• You will need two sets of lugs nuts to use these adapters.
•     - One set of bulge acorn 3/4" hex open end lugs to bolt the adapter to the vehicle.
•     - One set of the appropriate lug nut style with the "adapter stud thread size" listed above to bolt the wheel to the adapter.
• Remove any retaining clips from the vehicle's wheel studs prior to installing the adapters.
• The assembly bolts, lug nuts on the adapters and wheels must be properly torqued when installing.
• Torque the assembly bolts that hold the adapter together to 40 ft lbs., removeable thread lock is optional.
• We make no promise or guarantee that this item is compatible with your vehicle and/or wheels.
• Vehicle compatibility, if listed, is used to match the vehicle bolt pattern with the adapter only.
• The adapters must be installed correctly, Lug Nut Guys and/or the manufacturer cannot be held responsible for improper installation causing failure.
• Please ask if you have any questions, we're here to help!